For bigger, or longer, projects, and hands-free operation. This 1/4-hp flex-shaft grinder has a 42" long (counting the chuck) flexible shaft, a keyed chuck that accepts bits up to 5/32", a variable-speed control foot-pedal power switch, and a comfortable 1" dia hand grip. The motor runs 500 to 22,000 rpm, operates on 120VAC, measures 3-1/4" dia x 4" long, and has a sturdy hook to hang it from an over-the-bench shelf. Intermittent duty. Over 25 grinding tool accessories included!

Top off this beautiful tool with our 227 piece accessory set. Click here

This excellent 4-piece set of double-ended picks is made of nylon so you won't damage your electronics or electrocute yourself. They have hex-shaped shafts for a good grip, and assorted pick, probe, hook and scraper ends. Equally good for auto detailing or any place where you want to avoid scratching.

Prick tiny bits of gunk from nasty places with these U.S. made hardened stainless steel dental tools. But please don't use them for dental work. They are slight seconds, and some may have been re-worked which only matters to teeth. Trim excess glue from models, place a barrel on the deck of the ship-in-a-bottle, clean a rasp. If you need the strength and durability in a tiny pick, you need these tools. We have an assortment of the sort you've seen laid out on your dentist's tray. We'll pick (3) different ones for you.

This set of (6) tweezers is as useful as it looks daunting. The (6) stainless steel tweezers vary in size from 4-1/2" up to 7". Two of the tweezers have serrated tips one is inverse, one has a slide latch and the others are straight flat tip. The set comes in a clear front plastic carrying case. Good for model cars, planes or hard to reach splinters.

Winner of this week's "What IS That?" award. It's a watch crab, also called a spanner wrench, that's designed to remove the back from watches, lenses from telescopes, and other thin, flat components from whatever they're attached to. Heavy for its size, it's 1" x 2-3/4" x 3/8" thick, with sharp 1/4" prongs projecting from the edge. The prongs move from 2" to 7/16" apart as you spin the knurled nut between them. An impressive tool to flash in front of your brother-in-law. If he doesn't read our catalog, he won't have a clue!

A really cool mini drill set for your mini projects! The 7-1/4" long aluminum push drill for delicate work comes with (1) 1/16" and (1) 1/32" collet, and (20) bits that fit them. The bits are #61 through #80, some so needle-thin they could add tear ducts to a fashion doll. They come in a mini case marked with the number and size of each bit in mils.

If Verdi Had Been A Jeweler... The Anvil Chorus would have been much quieter. Play your own chorus on this excellent forged jeweler's anvil, which is much smaller than the ones in cartoons. In heavy polished steel, it measures approx 4-1/4” x 1-3/4” x 1-1/8” with a 2-1/4” x 1-1/4” flat working surface for chasing, bending corners and flattening wire to harden it, plus (1) round horn and (1) flat horn with a hole for riveting and beading. Essential for making flattened hook-and-eye clasps with craft wires. Also, a must for teeny-tiny blacksmiths.

Riffler files are most prized by sculptors, wood carvers, model makers and similar fashioners of precision objects. They come in a variety of flat, round and triangular shapes. They are usually pointed and always have a delicate curve toward the point which makes them particularly useful for working in tight and curvy spots. We have a set of (10) in an attractive red plastic case. They are 3 x 180 mm size (about 7"), and were made in China for the King Manufacturing Co. Very nice quality at a very nice price. They can cost as much as $4.00-$5.00 apiece in regular outlets.

Any way you want it. This cast aluminum wire jig for jewelry-making measures 4-3/8" x 1" x 5/8" with (4) 1” x 1/4” steel pegs, semi-circular and triangular bending points, slots at 3/32",1/8" and 3/16" wide, plus one with a small divot to one side. Includes mounting screws so you can stick it to your workbench. Not into jewelry? Bend your own fishing hooks, S-hooks and soft metal strips.  

It's officially a watch-case holder, and indispensable for jewelers and watch collectors, but it's equally useful for holding anything small and squirrely while you work on it. A pair of 1-3/4" long x 15/16" tall brackets have (4) sets of (6) holes that take (4) movable posts. Spring-loaded jaws dial open to a max of 1".