The boys in the back room called this IZoom Pro™ flashlight ludicrously bright, and they’re usually right. Rated at 300, 1200, and 2500 lumens with a strobe setting, light is through a reticular COB LED element with an adjustable focus lens. Takes (6) “AA” batteries, and they’re included. Measures 7” long x 1-1/2” dia in black aluminum alloy body. Has up to a 4-hour life, depending on the beam strength you use.

Teensy tiny brushes for cleaning teensy tiny tubes, airbrushes, spray guns, tattoo equipment, nozzles, etc. Think miniature bottle brushes. You get a set of (5) brushes: 1/32", 1/16", 3/32", 1/8" and 3/16" dia. All have nylon bristles, are 4" long, and are on a slip ring so you won't lose them.

Any way you want it. This cast aluminum wire jig for jewelry-making measures 4-3/8" x 1" x 5/8" with (4) 1” x 1/4” steel pegs, semi-circular and triangular bending points, slots at 3/32",1/8" and 3/16" wide, plus one with a small divot to one side. Includes mounting screws so you can stick it to your workbench. Not into jewelry? Bend your own fishing hooks, S-hooks and soft metal strips.  

Stop wrapping duct tape around your vise, and protect delicate material the right way with this pair of hard-rubber, ribbed pads made to cover the jaws. The pads have (2) rare earth magnets embedded inside the rubber. Made for a 4" vise, they measure 4" long x 1-1/8" high x 3/8" thick with a lip along one long side. The rubber is 3/32" thick.

And it’s cute. Just 4-3/8" long with a pocket clip, it looks like a pen but it has (8) driver bits stored in the barrel. The 5/32” hex bits include slotted 1.5mm, 2mm, 3mm, 3.5mm, and  Phillips #00, #0, #1, and  #2 . We’ll pick one in red, black or blue, because who cares?

This set of (6) tweezers is as useful as it looks daunting. The (6) stainless steel tweezers vary in size from 4-1/2" up to 7". Two of the tweezers have serrated tips one is inverse, one has a slide latch and the others are straight flat tip. The set comes in a clear front plastic carrying case. Good for model cars, planes or hard to reach splinters.

Then better check your bore. This tiny bore light, made for looking into barrels or other tight spots, measures 3-1/4" long x approx 5/8” dia with a single white LED. Includes a slide on right-angle fiber-optic head and a pocket clip. Take off the head and it’s a nice mini flashlight. You add (1) “AAA” battery.

These are the so-called miracle shears. They were designed for use by paramedics and others needing quickly to cut wire, light sheet metal, or other tough stuff that might stand between them and their quarry. They are normally demonstrated cutting a penny in two. Which they will do. But not as a steady diet. Let's dispel a few myths. While these are Pakistani stainless, we're not talking any miracles in manufacturing. They are good for their purpose, and real handy to have in the old tool box. But their purpose isn't making pennies into 5-mil pieces, and you will twist or break them at about the same time you find out that you've done the same thing to U.S. laws! For sheet metal or wire or fishing leaders or tin cans or whatever, be our guests.

This 16-piece set of watchmaker's tools are just as handy for jewelry-makers, crafters, or anyone else working with small parts. The professional watch-repair kit Includes (2) tiny Phillips-head screwdrivers, (3) diminutive flat-heads, a case knife, non-magnetic tweezers, case wrench, metal/plastic watch hammer, link-pin remover, double-head pin pusher, (3) pin-punches, small needle-nose pliers, and a watchband holding block. Just changing bands and batteries? Get these tools to make it a lot easier, and order a brand-new pack of 30 popular-size button batteries-(6) AG1, (6) AG3, (6) AG4, (3) AG5, (3) AG12, and (6) AG13.

Walking sticks have moved into the space age! This walker's/hiker's friend has futuristic features and the look of an inter-galactic weapon. The high-quality collapsible aluminum stick extends from a packable 27" to a full 43", and has a carbide tip with a rubber cover, a removable 2" dia disk to keep the stick from sinking into soft ground, and an internal shock absorber that can be turned on or off. At the top, a 5-LED flashlight with a 90° pivot is embedded in a molded-plastic cane-style handle to light your way. For mountain trekking, lengthen the stick, slip the adjustable canvas wrist strap over your hand, and clutch the stick by the padded foam section below the cane handle. Directions, diagrams, and 1100mm to 1350mm gradations are marked clearly on the 3-draw pole. We'll pick a black or anodized red, blue, or silver version for you.

Can't beat a classic. These uncoated ceramic donut magnets have a 1-lb pull, which makes them dandy for classroom or refrigerator use. They measure 1-1/4" dia x 3/8" ID x 3/16" thick and are polarized on the faces. You get a wrapped roll of 29 donuts.

Pick up this 1-3/4" x 7/8" x 3/8" ceramic pick-up magnet while we still have it. It's in a heavy metal housing and has a stationary metal hoop, about 1/2" i.d., on top. The manufacturer tells us the magnet will grab up to 5 lbs of metal, however Pat and Magnet Testing Team #3 have repeatedly lifted 10+ lbs, so it's very strong. Especially if you're going to dangle it on the end of a cord to gather spilled nails or to fish your keys out of the lake/pond/sewer/drain!

A really small guy who lives....Whoops! Wrong Chuck. This one is a drill or rotary tool chuck with a 1/8" shank and fits bit sizes #60-#80 to facilitate handling tools with truly small shanks. Very handy in the modeling and electronics worlds.

..my sweet engravable you. Safeguard your stuff with this little battery-powered engraving pen. The 1/16” dia head vibrates to let you inscribe your ID on stuff  that might otherwise wander off. Surprisingly effective for a lightweight tool. Measures approx 6” long x 1” dia and works on metal, wood, glass, plastic, leather and more. Runs on (2) included “AA” batteries.

This all-purpose scissors is the favorite of everyone at A.S.&S.: Pat uses his to cut and strip wire. C.J. uses his to slit the tape on packages. Mary Ann uses hers to open bags of pretzels. It's 6-1/4" long overall, with a very sharp 2" stainless steel blade and large, comfortable handles. It would sell for $9.95 retail if it was new, but it was used for one day to cut cloth in the assembly plant of a major car company, then discarded. Quality control is a wonderful thing.

You get (3) of these stainless steel surgical scissors, which have a shorter working length (with the hinge closer to the jaws) than regular snippers, but you still shouldn't try to remove your own appendix. Measure 4-3/8" long and are quite sharp.

Donut magnet you can take to town!! 74mm dia x 14mm thick with a 30mm hole. Very strong and well pedigreed - in fact, its kin are activating pacemakers. They are of a high permeability ferrite material with a lovely light blue or white epoxy coating. Okay, we have them because there is the odd bubble, slight scratches or the word MAGNET painted in the coating which ruled them out of the medical ball, but they're fine company nonetheless. Good display bases, paper clip traps, and super for classroom demos.

Don’t stick cotton swabs in anyone’s ears, even your elephant’s, although the largest of these will be tempting. Our each is a giant 325-piece pack of single-tip cotton swabs on wooden sticks and in (6) different sizes. The smallest is about what you’ve got in your medicine cabinet, and the rest range on up to the elephantine, 8-1/2” long with 3/4” dia swabs on the end. Were thinking artists, art restorers, auto detailers, electronics techs, gunsmiths and fussbudgets of all sorts will love them.