BEST SELLERS

The 8-in-1 screwdriver/flashlight combo from iZoom® features un-lose-able drivers. Includes slotted 1/8", 3/16", 1/4", Phillips #0, #1, #2, plus mini-slotted and Phillips, all on hinges at the bottom of the light. Swing them up and they snap in place with the light as a handle. The light/handle has (6) cool-white LEDs shining at 100 lumens. The whole shebang measures 5” long x 1-3/4” dia.

Look, Ma, one hand! These 10" Powerbuilt® wrenches have spring-loaded, self-adjusting jaws made to bite, hold and turn virtually anything--round, flat, hex or oddly shaped--that will fit. The jaws open to 2-3/8" apart and remain parallel. Designed so the jaws will generate 4X the clamping power of the ANSI pliers standard. Unlike you, its jaws have hardened steel teeth. Good to have a few in the garage, workshop and camper.

This is the warranty-violator special, or just a MacGyvering guys toolbox. The black, 8” x 6” x 1-1/2” zipper pouch holds a rechargeable battery power pack with a USB output, which will power the little, quite gusty fan, the 5-LED flashlight, and the reversible torquey screwdriver with tiny Phillips, flathead, hex and square bits. Battery will also charge cellphones and other devices. 

Teensy tiny brushes for cleaning teensy tiny tubes, airbrushes, spray guns, tattoo equipment, nozzles, etc. Think miniature bottle brushes. You get a set of (5) brushes: 1/32", 1/16", 3/32", 1/8" and 3/16" dia. All have nylon bristles, are 4" long, and are on a slip ring so you won't lose them.

Yes, there’s a scientific explanation, but we prefer to think this magnetizing/demagnetizing tool relies on magic. Stick a screwdriver head in the bottom, it’s magnetized. Stick it in the top, it’s demagnetized. Fun for the whole family. Measures 2” square x 1-1/4” with stair-step ports for blades of different sizes. Never drop a screw again.

The boys in the back room called this IZoom Pro™ flashlight ludicrously bright, and they’re usually right. Rated at 300, 1200, and 2500 lumens with a strobe setting, light is through a reticular COB LED element with an adjustable focus lens. Takes (6) “AA” batteries, and they’re included. Measures 7” long x 1-1/2” dia in black aluminum alloy body. Has up to a 4-hour life, depending on the beam strength you use.

This 300 Lumen LED light is a mighty mite. Just under 4-1/2" long x 1" dia, you slide the sleeve and the beam zooms from a flood to a don't-stare-into-this focused spot. In black or gun metal anodized aluminum, it's weatherproof and shockproof with a latching button switch and a pocket clip. Depress the button halfway when it's on and it goes into a rapid-flash mode for emergency signaling. Visible for 275 meters. Five hour life with the included 1-"AA" battery and a 110K+ hour bulb life.

Any way you want it. This cast aluminum wire jig for jewelry-making measures 4-3/8" x 1" x 5/8" with (4) 1” x 1/4” steel pegs, semi-circular and triangular bending points, slots at 3/32",1/8" and 3/16" wide, plus one with a small divot to one side. Includes mounting screws so you can stick it to your workbench. Not into jewelry? Bend your own fishing hooks, S-hooks and soft metal strips.  

Nothing beats double sided glue tape for mounting pics, art and documents. Lay down a line of stickiness, and Bob’s your mother’s brother. This glue tape is acid-free and 5/16” wide x really, really thin--the way it should be. In a plastic dispenser. You pick the 195” (16+ feet), the 390” (32+ feet) or the 1170” (97+ feet).

This set of (6) tweezers is as useful as it looks daunting. The (6) stainless steel tweezers vary in size from 4-1/2" up to 7". Two of the tweezers have serrated tips one is inverse, one has a slide latch and the others are straight flat tip. The set comes in a clear front plastic carrying case. Good for model cars, planes or hard to reach splinters.

Riffler files are most prized by sculptors, wood carvers, model makers and similar fashioners of precision objects. They come in a variety of flat, round and triangular shapes. They are usually pointed and always have a delicate curve toward the point which makes them particularly useful for working in tight and curvy spots. We have a set of (10) in an attractive red plastic case. They are 3 x 180 mm size (about 7"), and were made in China for the King Manufacturing Co. Very nice quality at a very nice price. They can cost as much as $4.00-$5.00 apiece in regular outlets.

Our smallest vise, and arguably our handiest around the house: call it the Jaws of Aluminum. Clamp this small table vise onto a surface up to 3/4" thick and let it be your third hand. The jaws are 1-1/2" wide and open to a maximum of 1-1/4".

Stop wrapping duct tape around your vise, and protect delicate material the right way with this pair of hard-rubber, ribbed pads made to cover the jaws. The pads have (2) rare earth magnets embedded inside the rubber. Made for a 4" vise, they measure 4" long x 1-1/8" high x 3/8" thick with a lip along one long side. The rubber is 3/32" thick.

These stainless steel tailors' shears are sized halfway between "Edward Scissorhands" and "my grandfather was a cutter in the garment district." At 12" long they're perfect for folks who do a lot of heavy duty snipping or are just tired of wimpy little scissors. And yes, please don't run with them.

This all-purpose scissors is the favorite of everyone at A.S.&S.: Pat uses his to cut and strip wire. C.J. uses his to slit the tape on packages. Mary Ann uses hers to open bags of pretzels. It's 6-1/4" long overall, with a very sharp 2" stainless steel blade and large, comfortable handles. It would sell for $9.95 retail if it was new, but it was used for one day to cut cloth in the assembly plant of a major car company, then discarded. Quality control is a wonderful thing.

These are the so-called miracle shears. They were designed for use by paramedics and others needing quickly to cut wire, light sheet metal, or other tough stuff that might stand between them and their quarry. They are normally demonstrated cutting a penny in two. Which they will do. But not as a steady diet. Let's dispel a few myths. While these are Pakistani stainless, we're not talking any miracles in manufacturing. They are good for their purpose, and real handy to have in the old tool box. But their purpose isn't making pennies into 5-mil pieces, and you will twist or break them at about the same time you find out that you've done the same thing to U.S. laws! For sheet metal or wire or fishing leaders or tin cans or whatever, be our guests.

Our thinner picker-upper, but with a powerful 5-lb-pull, 9/16" dia magnet on the business end (for spilled nails, the screw that rolled under the stove, or the heavy wrench you dropped into the sump). The 5/16" dia x 5-1/4" long 4-draw barrel extends to a full two feet. Has a convenient pocket clip.

..my sweet engravable you. Safeguard your stuff with this little battery-powered engraving pen. The 1/16” dia head vibrates to let you inscribe your ID on stuff  that might otherwise wander off. Surprisingly effective for a lightweight tool. Measures approx 6” long x 1” dia and works on metal, wood, glass, plastic, leather and more. Runs on (2) included “AA” batteries.