This set of (10) diamond hole saws could (extremely theoretically) cut holes in diamonds, but mostly they're for glass, ceramic, marble, slate and tiles. You get 40-grit, diamond-core hole saws at 1/8", 5/32", 13/64", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16" and 1/2" OD, all 2-1/2" long with 1/8" shanks.

One promotion above 1st Lieutenant Polyimide? Nope-- tape material that makes duct tape hang its head in shame. Kapton polyimide is used in everything from flexible printed circuits, to the Apollo moon missions, to cryogenics. In this case, it’s a 1/2” wide x .0025” thick adhesive tape on a 36-yard roll. Has a normal tensile strength of 30 lbs, insulates up to 7500V, and has a working temperature from -100F to 500F. High temp tolerance makes it perfect for masking during powder coating. Made in the USA.

Okay, it isn't the cheapest magnet in the warehouse - but we pulled about 35-40 pounds with this 4-7/8" x 1" x 3/4" ceramic magnet,  and we think it's a bargain. It has a 6" bracket with mounting holes on 5-1/2" centers, plus a 1/2" ID eyehook bolted into the center of it. It's all set to troll the bottom of the lake next time your filing cabinet falls overboard.

These non-fog not-really-welding goggles are just what you need to cap off your costume. Sure, the flip-up dark lenses are too dark to see through easily (that's why they have conventional clear plastic lenses underneath them), but leaving them flipped up just adds to your zany, adventurous, steampunk persona. Aesthetics include side vents and an adjustable elastic head strap. And the goggles accept standard 50mm replacement lenses, but if you think the party is going to be that rough, we suggest that it would be cheaper and easier to just buy a couple of pairs at this price-from-the-past.

How many chucks would a key chuck key if a key chuck could key chucks. A key chuck would key...oh forget it. Buy this (4) headed key chuck and know you will have the right size for most popular chucks on tools from Delta, Black & Decker, Bosch and other manufacturers of portable and smaller stationary tools.

Rock hammer with one squared chipping face and one pointy picking face, ideal for prospectors, rock hounds, construction and more. A single piece of forged and polished steel with a molded rubber grip makes this a solid and reliable tool that will last. 10-1/2" long x 6-1/2" across the 20 oz. head, 1-3/4 lbs. total. Well made. Good buy. Good bye!

Life will never be dull again if you carry this pocket-sized diamond knife and scissors sharpener. Comes with (3) 2" long diamond encrusted rods, (2) fine and (1) coarse. The 1-15/16" x 2-3/8" x 5/8" holder is also a frame with slots that hold the rods at the correct blade-sharpening angle. Even though it's made as a pocket tool, with a short keychain, it would abrade its way right out of any pocket. We recommend you just hang it above your workbench.

Refillable butane torch, with a 1/2" dia x 5-3/4" body and a 1/4" dia. x 2-1/4" long head. Strong enough to melt solder, silver and gold solder, glass tubing and such metals as gold, silver, copper, tin, and aluminum. Equally handy around the hobby shop, jewelry bench, or lab. Refills from standard butane lighter canister.

Voted most likely to attract by the judges, this magnet has the relative strength of 10 men. A shiny silver 1/2" cube of neodymium magnetism, it packs approx a 15-lb pull. If our boss Pat were that strong he could lift 2,160 lbs! Besides its superpower strength, this beautiful cube also would improve the looks of your fridge or bulletin board to no end.

Penciltype soldering iron imported from Taiwan. Overlook the charming instructions, it works just the way everyone does. 30 watt 110 volt, nice, serviceable unit.

Or forever compared to sandpaper, anyway. These sponges from 3M have a microfine grit and measure 5-1/2" x 4-1/2" x 3/16".  We'll send you (3) so your kids can help too. And they’re made in England, where the royal grit is always microfine.

Whatever you call them they are super handy. Used for suturing, these are carbon-steel straight-locking needle holders, 5” long with narrow serrated 7/16” tips. And yes, you’re permitted to use them for other stuff if you’re not a surgeon. (Or even if you are a surgeon, actually.)

These stainless steel tailors' shears are sized halfway between "Edward Scissorhands" and "my grandfather was a cutter in the garment district." At 12" long they're perfect for folks who do a lot of heavy duty snipping or are just tired of wimpy little scissors. And yes, please don't run with them.

This plated N52 14,200 gauss neodymium magnet is shaped like a miniature silver ingot, measuring 1-1/2" long x 1/2" wide x 1/4" thick. Has a big hangonability quotient, which the manufacturer claims is 15 lbs of pull, meaning it's probably closer to 13 lbs. Impressive either way for such a cute little magnet. 

Small protective goggles, for kids or anybody else with, well, a little head. (You know who you are.) They're 5" across, or 15% smaller than standard goggles. Nice quality, with a plastic lens and indirect ventilation. They meet ANSI standards for protection from flying chips and particles. Flexible, clear-vinyl body with adjustable elastic headband.

Let’s hear it for our 4-piece scissors collection, ready to meet all of your home and office scissing needs. All with cushioned handles and all stainless steel, you’ll get 5-1/2” and 6-1/2” straight-handled office/detail scissors along with 7-1/2” and 8-1/2” contour-handled kitchen versions. All are ambiscissoral,or equally easy for righties and lefties to use.

We named it for Billy, our very own social media maven, but the manufacturer, iZoom®, calls it a Security Flashlight. The solid heft and sturdiness of this this particular item cannot be understimated. Weighs a formidable 3/4-lb, and measures 14" long in black  aluminum alloy with high/low/strobe modes and a max 200-lumen rating for the single SMD (surface mount device) LED. On a 6" wrist strap, it comes with (3) “AA” batteries.

Gadgeteers, get out your charge card. This is an instrument you absolutely have to own. It reaches down below sofa cushions, inside piggy banks, into fish tanks, and past a gallbladder. Not simultaneously, of course. The slim stainless steel alligator forceps is 11" long OA, with a 2-1/2" angled handle and an 8-1/2" reach. It has small 5/8" long serrated jaws, delicate but tight, at the very tip! Better buy an extra. We guarantee people are going to "borrow" these if they see them.