Small protective goggles, for kids or anybody else with, well, a little head. (You know who you are.) They're 5" across, or 15% smaller than standard goggles. Nice quality, with a plastic lens and indirect ventilation. They meet ANSI standards for protection from flying chips and particles. Flexible, clear-vinyl body with adjustable elastic headband.

This aluminum alloy Versa Beam® tactical flashlight has an astounding (6) modes: low, medium and high flashlight; strobe and SOS at up to 350 lumens; and a 200-lumen side beam, which turns the whole thing into a lantern when you pull both ends apart and expand it. Also has a magnetic base. Weather-resistant, it measures 1-1/2" dia x just shy of 6” long, sliding open to 7”. You add a trio of “AAA” batteries, conveniently available right here, for (5) hours of light.

Small, but mighty useful if you need a tiny tap and die set for threading wire or stripped screws. The micro set has a 3-1/4" long die plate and 14 taps (sizes 7 through 20 -- read 0.7 mm through 2.0 mm), and a mighty attractive price. A little oily in its vinyl storage pouch -- but it's all steel, after all, and has to safeguard its complexion.

It's stylish, it's handy, it has a slightly menacing look to it, and-truth be told-it's a lot of fun. It's a handheld butane torch, great for everyone: in the lab, under the hood, working with circuitry, heck, a chef can even use it to flambé the dessert. 6-1/4" tall, 3-5/8" x 2-1/4" dia base, 3-5/8" long at the top, with a textured grip, push-button start with safety, and air adjustment to control the size of the flame. Easy to fill with butane, which you'll need to do 'cause no fuel is included.

Super-long Q-type tips are for people who don't want to get too close to their ears. Actually, these are tech swabs with cotton tops and wooden sticks for lab work, so leave your ears out of it. Good for other body parts, though, and for too many craft applications to list. You get (3) packs, for a total of (300) 6-1/4" long fuzzy-topped sticks.

Hang on to your widgets, screws, bolts, pins and assorted teeny tinies while you're taking things apart. This indispensable 6" dia x 1-1/8" deep magnetic stainless steel dish from Omaha Tools holds all those parts and saves you from crawling around on the floor later, when you're putting things back together.

Prick tiny bits of gunk from nasty places with these U.S. made hardened stainless steel dental tools. But please don't use them for dental work. They are slight seconds, and some may have been re-worked which only matters to teeth. Trim excess glue from models, place a barrel on the deck of the ship-in-a-bottle, clean a rasp. If you need the strength and durability in a tiny pick, you need these tools. We have an assortment of the sort you've seen laid out on your dentist's tray. We'll pick (3) different ones for you.

The 5/32” bore in the center of this small plated neodymium magnet just makes it easier to mount. Measures 3/4" dia x 1/4" thick with a pull of approx 7 lbs. Works great with #6 or #8 flat head screws.

Our super soldering set comes with a 25W soldering iron with a 5/32" dia tip, approx (5) feet of de-soldering braid, de-soldering pump, iron holder and (5) feet of lead-free solder. A must have for any budding electronics kit builder. 

Trying to cut back on hobby expenditures? This incredibly priced utility knife set is x-actly what you need. Standard interchangeable blades and holders, the largest of which has an easy-grip, screwdriver-type handle. Everything is lined up in a fitted plastic box with extra blades magnetically anchored. The 13–piece set has (3) holders, plus assorted blades. The 48–piece set has (7) holders, a wide assortment of blades, (1) tube of glue, and (1) sharpening stone. Very nicely priced. Very sharp.

We like these small pliers and cutters - they're a higher quality than most of the Chinese import tools we're offered. They are drop-forged, high-carbon steel with double-leaf springs, lap joints and rubberized foam handles. There is a trim 6" needle nose, and a 4-1/2" mini-round diagonal cutter. For precision work and hobbies, and especially nice for anyone with small hands.

You pick from our straight or curved locking-jaw forceps, both with rubber-dipped handles and jaws for extra-gentle applications. Measure 5-1/2" long with 1-1/4" long jaws.

Dead-center in the universe of tools you can’t have too many of, this 7-1/2" driver has (2) reversible heads, one with Phillips #1 and 3/16” flat, and the other with Phillips #2 and 1/4” flat, in chrome vanadium. Handle is 4-1/2” long and rubber-coated. Keep it in the kitchen junk drawer, where you can always find it.

A fine concept and pretty successful execution. Weighted bases hold fully adjustable clips and lenses for delicate hands–free work. The Helping Hand w/solder has a 2” high base connected to (2) alligator clips via (3) universal joints and a 4–1/2" sliding beam, and to a 2–1/2" dia roughly 3X magnifier via another universal joint on the sliding beam. It also adds a holder for your soldering iron, plus a hole and thumbscrew in the base to firmly position it. Think of the clips as extra hands to hold wires, components, beads, what-have-you while you perform some operation on them with your own two hands.

Call it the best paint (and label and putty) scraper ever made. Great big nonslip padded grip, a blade holder with a thumbscrew (reverse the blade when not in use), and a 4-draw, push-button extension that takes it from 6-1/2" to 9-1/2" long. Comes with one blade installed and two extra in the handle. The scraper to have when you're scraping more than one window. From IIT®.

We named it for Billy, our very own social media maven, but the manufacturer, iZoom®, calls it a Security Flashlight. The solid heft and sturdiness of this this particular item cannot be understimated. Weighs a formidable 3/4-lb, and measures 14" long in black  aluminum alloy with high/low/strobe modes and a max 200-lumen rating for the single SMD (surface mount device) LED. On a 6" wrist strap, it comes with (3) “AA” batteries.

More artistic than using a router, and much, much less work than carving with chisels: wood-burning is back. Practice your skills with our 20W wood-burning pen set. Easily details and decorates wood, leather and cork. (Also butter if you're very, very quick.) Includes a safety stand, (2) pointed tips, and (2) wedge-shaped tips. For the extra-creative, our set of nibs for the pen adds another (28) points, including a hot plastic and foam cutter, (10) soldering tips, (15) varied wood-burning nibs in assorted shapes and points, and both number and alphabet stencils.

This little handheld tubing cutter is made for cutting thin-wall brass, copper, aluminum and the like. Adjusts from 1/8” to 7/8” via a thumbscrew and has dual slotted 7/16” x 1/4” dia rollers, and an 11/16” cutting wheel. The whole shebang measures 1-3/4" x 4-1/2" x 3/4".