TOOLS

Bored?

Then better check your bore. This tiny bore light, made for looking into barrels or other tight spots, measures 3-1/4" long x approx 5/8” dia with a single white LED. Includes a slide on right-angle fiber-optic head and a pocket clip. Take off the head and it’s a nice mini flashlight. You add (1) “AAA” battery.

accent

FIBER OPTIC LED BORE LIGHT

Bored?

Then better check your bore. This tiny bore light, made for looking into barrels or other tight spots, measures 3-1/4" long x approx 5/8” dia with a single white LED. Includes a slide on right-angle fiber-optic head and a pocket clip. Take off the head and it’s a nice mini flashlight. You add (1) “AAA” battery.

accent
$3.90 EACH
$4.95
-21%

Not Just For Watchmakers

This 16-piece set of watchmaker's tools are just as handy for jewelry-makers, crafters, or anyone else working with small parts. The professional watch-repair kit Includes (2) tiny Phillips-head screwdrivers, (3) diminutive flat-heads, a case knife, non-magnetic tweezers, case wrench, metal/plastic watch hammer, link-pin remover, double-head pin pusher, (3) pin-punches, small needle-nose pliers, and a watchband holding block. Just changing bands and batteries? Get these tools to make it a lot easier, and order a brand-new pack of 30 popular-size button batteries-(6) AG1, (6) AG3, (6) AG4, (3) AG5, (3) AG12, and (6) AG13.

accent

16-PIECE WATCH REPAIR TOOL SET

Not Just For Watchmakers

This 16-piece set of watchmaker's tools are just as handy for jewelry-makers, crafters, or anyone else working with small parts. The professional watch-repair kit Includes (2) tiny Phillips-head screwdrivers, (3) diminutive flat-heads, a case knife, non-magnetic tweezers, case wrench, metal/plastic watch hammer, link-pin remover, double-head pin pusher, (3) pin-punches, small needle-nose pliers, and a watchband holding block. Just changing bands and batteries? Get these tools to make it a lot easier, and order a brand-new pack of 30 popular-size button batteries-(6) AG1, (6) AG3, (6) AG4, (3) AG5, (3) AG12, and (6) AG13.

accent
$9.50 EACH
$14.95
-36%

Skinny But Strong Like Bull

Our thinner picker-upper, but with a powerful 5-lb-pull, 9/16" dia magnet on the business end (for spilled nails, the screw that rolled under the stove, or the heavy wrench you dropped into the sump). The 5/16" dia x 5-1/4" long 4-draw barrel extends to a full two feet. Has a convenient pocket clip.

accent

SKINNY PICKER-UPPER

Skinny But Strong Like Bull

Our thinner picker-upper, but with a powerful 5-lb-pull, 9/16" dia magnet on the business end (for spilled nails, the screw that rolled under the stove, or the heavy wrench you dropped into the sump). The 5/16" dia x 5-1/4" long 4-draw barrel extends to a full two feet. Has a convenient pocket clip.

accent
$2.95 EACH

The $10 Chain Saw

No gas or electricity needed for this pocket-sized manual chain saw, the camper's pal. It's 30" long overall, with (82) spring-steel teeth on the 18-1/2" middle section, and canvas loop handles on each end. Imagine a cross between a sharpened bike chain and a garotte. It's easy to use (we tested it), works a whole lot faster than a hatchet, rolls up into no space at all, and stores in the heavy-duty canvas belt pouch that comes with it.

accent

POCKET SIZED HAND CHAIN SAW

The $10 Chain Saw

No gas or electricity needed for this pocket-sized manual chain saw, the camper's pal. It's 30" long overall, with (82) spring-steel teeth on the 18-1/2" middle section, and canvas loop handles on each end. Imagine a cross between a sharpened bike chain and a garotte. It's easy to use (we tested it), works a whole lot faster than a hatchet, rolls up into no space at all, and stores in the heavy-duty canvas belt pouch that comes with it.

accent
$8.80 EACH
$9.95
-12%

Side Cutters

You might know these as “diagonal cutters,” which is what electricians sometimes call them because “wire cutters” is too easy. These are 6" long, nickel-plated high-carbon steel with dipped handles so you don’t electrocutionate yourself.

accent

NICKEL-PLATED WIRE CUTTERS

Side Cutters

You might know these as “diagonal cutters,” which is what electricians sometimes call them because “wire cutters” is too easy. These are 6" long, nickel-plated high-carbon steel with dipped handles so you don’t electrocutionate yourself.

accent
$3.85 EACH

Stripping Crimper

This 6” long wire stripper/crimping tool has (7) positions to strip wire between 10 and 22 AWG, with a 3/8” cutting edge, serrated ends and a lock. Also has plastic-coated handles. Pat says they’re better quality than your average pair.

accent

STRIPPER CRIMPING TOOL

Stripping Crimper

This 6” long wire stripper/crimping tool has (7) positions to strip wire between 10 and 22 AWG, with a 3/8” cutting edge, serrated ends and a lock. Also has plastic-coated handles. Pat says they’re better quality than your average pair.

accent
$4.00 EACH
$4.95
-19%

Finger-Tip Saw

This Stansport product is called the Finger-Tip Saw (although all you really need to cut off fingertips is a good garden pruner). This is actually a survival/hunter's wire saw, a 20" long, thin and sharp serrated wire with a 1-1/8" slip-ring at each end (for your fingertips). Coil it up and you can store it in a shirt pocket. Cuts "wood, plastic, bone, etc." and includes instructions for making a one-handed saw with a short tree branch.

accent

FINGER-TIP WIRE SAW

Finger-Tip Saw

This Stansport product is called the Finger-Tip Saw (although all you really need to cut off fingertips is a good garden pruner). This is actually a survival/hunter's wire saw, a 20" long, thin and sharp serrated wire with a 1-1/8" slip-ring at each end (for your fingertips). Coil it up and you can store it in a shirt pocket. Cuts "wood, plastic, bone, etc." and includes instructions for making a one-handed saw with a short tree branch.

accent
$2.50 EACH

Ecdysiast

AKA automatic stripper. Sorry folks, but this one strips insulation to reveal wire, not flesh. Which may still give you a charge, depending upon your hookup!! 6-1/2" Long with pliers type grip and automatic self-adjustment to strip wires from 0.2 to 6mm without damaging the wire says the manufacturer. We recommend use on 18 GA stranded, 22 GA solid wire or heavier as it will cut the wire of lighter weights. A second jaw is a cable cutter. Brand new, made in China. And very handy too, if you are doing anything with wiring.

accent

AUTOMATIC WIRE STRIPPER

Ecdysiast

AKA automatic stripper. Sorry folks, but this one strips insulation to reveal wire, not flesh. Which may still give you a charge, depending upon your hookup!! 6-1/2" Long with pliers type grip and automatic self-adjustment to strip wires from 0.2 to 6mm without damaging the wire says the manufacturer. We recommend use on 18 GA stranded, 22 GA solid wire or heavier as it will cut the wire of lighter weights. A second jaw is a cable cutter. Brand new, made in China. And very handy too, if you are doing anything with wiring.

accent
$2.95 EACH

Cut To The Tube

This little handheld tubing cutter is made for cutting thin-wall brass, copper, aluminum and the like. Adjusts from 1/8” to 7/8” via a thumbscrew and has dual slotted 7/16” x 1/4” dia rollers, and an 11/16” cutting wheel. The whole shebang measures 1-3/4" x 4-1/2" x 3/4".

accent

HANDHELD TUBE CUTTER

Cut To The Tube

This little handheld tubing cutter is made for cutting thin-wall brass, copper, aluminum and the like. Adjusts from 1/8” to 7/8” via a thumbscrew and has dual slotted 7/16” x 1/4” dia rollers, and an 11/16” cutting wheel. The whole shebang measures 1-3/4" x 4-1/2" x 3/4".

accent
$4.95 EACH

Gator Aide

On a stick. This 6-draw telescoping tool has a 1" steel alligator clip on the business end. Extends from 8-1/2" (with a pocket clip) to 36" long. Use it to light pilot lights and over-primed grills, to hold a magnet and grab lost screws, to fish wires, or to deliver stuff to the guy in the next cell. Unscrew the gator and it's a simple pointer, or you can put anything else with a 5/32"-36 thread on the end.

accent

36" TELESCOPING ALLIGATOR CLIP

Gator Aide

On a stick. This 6-draw telescoping tool has a 1" steel alligator clip on the business end. Extends from 8-1/2" (with a pocket clip) to 36" long. Use it to light pilot lights and over-primed grills, to hold a magnet and grab lost screws, to fish wires, or to deliver stuff to the guy in the next cell. Unscrew the gator and it's a simple pointer, or you can put anything else with a 5/32"-36 thread on the end.

accent
$2.95 EACH

Sawzabunch

Hacksaw/bow-saw combo for folks who like to be prepared. The 10" bow-saw has an 8” frame, and comes with a 4-tpi blade for wood and a 24-tpi blade for metal. Has a padded handle, and a hand guard so you don’t saw yer dang hand off.

accent

DUAL PURPOSE SAW

Sawzabunch

Hacksaw/bow-saw combo for folks who like to be prepared. The 10" bow-saw has an 8” frame, and comes with a 4-tpi blade for wood and a 24-tpi blade for metal. Has a padded handle, and a hand guard so you don’t saw yer dang hand off.

accent
$8.50 EACH

The Better Scraper

Call it the best paint (and label and putty) scraper ever made. Great big nonslip padded grip, a blade holder with a thumbscrew (reverse the blade when not in use), and a 4-draw, push-button extension that takes it from 6-1/2" to 9-1/2" long. Comes with one blade installed and two extra in the handle. The scraper to have when you're scraping more than one window. From IIT®.

accent

PADDED-GRIP EXTENDABLE SCRAPER

The Better Scraper

Call it the best paint (and label and putty) scraper ever made. Great big nonslip padded grip, a blade holder with a thumbscrew (reverse the blade when not in use), and a 4-draw, push-button extension that takes it from 6-1/2" to 9-1/2" long. Comes with one blade installed and two extra in the handle. The scraper to have when you're scraping more than one window. From IIT®.

accent
$4.95 EACH

Punch That Cow(hide)

This sturdy steel punch for leather goods has a coiled-steel spring, and (6) screw-in punches. Make 2, 2.5, 3, 3.5, 4 and 5mm holes, even in heavy leather. 8-1/2" long OA.

accent

6 PIECE LEATHER PUNCH SET

Punch That Cow(hide)

This sturdy steel punch for leather goods has a coiled-steel spring, and (6) screw-in punches. Make 2, 2.5, 3, 3.5, 4 and 5mm holes, even in heavy leather. 8-1/2" long OA.

accent
$18.75 EACH

Clumsy?

Drop stuff in the dark much? Under other stuff? Behind even other stuff? Your prayers are answered with this set of (2) extra long pick-up tools. Both 24” long on flexible shafts with plunger-driven metal claws and bright white LEDs so you can see what you’re picking up. One also has a 3-lb pull magnet, for added picker-up-ability. Powered by (3) button-cell batteries, included. In anodized aluminum, one red and one blue so they’ll match your outfits.

accent

24” PICK-UP TOOLS WITH LED LIGHTS

Clumsy?

Drop stuff in the dark much? Under other stuff? Behind even other stuff? Your prayers are answered with this set of (2) extra long pick-up tools. Both 24” long on flexible shafts with plunger-driven metal claws and bright white LEDs so you can see what you’re picking up. One also has a 3-lb pull magnet, for added picker-up-ability. Powered by (3) button-cell batteries, included. In anodized aluminum, one red and one blue so they’ll match your outfits.

accent
$19.95 EACH

Cutting Glasses

Our 5" long glass cutter comes in a package that says it’s 6” long, and who cares. (Surplus is our surname.) Has a heat-treated 3/16” dia cutting wheel, and 1/8” and 3/16” slots for breaking thin strips of glass. And like all glass cutters, it works best with a little light oil. Instructions on the back.

accent

5” LONG GLASS CUTTER

Cutting Glasses

Our 5" long glass cutter comes in a package that says it’s 6” long, and who cares. (Surplus is our surname.) Has a heat-treated 3/16” dia cutting wheel, and 1/8” and 3/16” slots for breaking thin strips of glass. And like all glass cutters, it works best with a little light oil. Instructions on the back.

accent
$4.50 EACH

Old Codger's Carving Set

Not an old codger? Get an early start. This was made for sitting on the porch, carving family heirlooms after supper. The pressboard case holds a 6-piece wood carving set with (3) small straight gouges, (1) straight chisel, (1) V-gouge and (1) skew chisel. All are approx 5" long, with wooden handles. Be even better if you used them while an old dog was asleep at your feet, but we don't sell old dogs.

accent

WOODCARVING SET

Old Codger's Carving Set

Not an old codger? Get an early start. This was made for sitting on the porch, carving family heirlooms after supper. The pressboard case holds a 6-piece wood carving set with (3) small straight gouges, (1) straight chisel, (1) V-gouge and (1) skew chisel. All are approx 5" long, with wooden handles. Be even better if you used them while an old dog was asleep at your feet, but we don't sell old dogs.

accent
$10.75 EACH

You Feel OK?

Feel better with our AES/metric steel feeler gauge. Has (16) 1-1/2" long blades to measure gaps (ignition points, tappets, plugs, rings, brake pads, like that) from .010"/0.25mm to .035"/0.88mm. Open carefully and keep the back of the package for an inches/mm conversion chart.

accent

FEELER GAUGE

You Feel OK?

Feel better with our AES/metric steel feeler gauge. Has (16) 1-1/2" long blades to measure gaps (ignition points, tappets, plugs, rings, brake pads, like that) from .010"/0.25mm to .035"/0.88mm. Open carefully and keep the back of the package for an inches/mm conversion chart.

accent
$3.95 PKG (2)

Drivers In A Disk

The flying saucer meets the screwdriver in this compact driver set. The 2-7/8" dia x 1" thick gray-plastic case with a pocket clip holds #3 and #4 flathead, #2 and #3 Phillips, #1 and #2 pozi, and #2 and #3 hex bits, plus a 2-1/4" long driver. The driver fits into a port in the housing for leverage. At this price, they're perfect for replacement bits, glove compartment, desk drawer, etc. Do handle them carefully, because the cases break easily.

accent

PORTA-BITS, LARGE

Drivers In A Disk

The flying saucer meets the screwdriver in this compact driver set. The 2-7/8" dia x 1" thick gray-plastic case with a pocket clip holds #3 and #4 flathead, #2 and #3 Phillips, #1 and #2 pozi, and #2 and #3 hex bits, plus a 2-1/4" long driver. The driver fits into a port in the housing for leverage. At this price, they're perfect for replacement bits, glove compartment, desk drawer, etc. Do handle them carefully, because the cases break easily.

accent
$1.95 PKG (3)

Showing 1–18 of 34 results