This solderable perf board for the electronics hobbyist measure 1-1/2” x 1-3/4” x 1/16” or 3-1/4" x 2-1/2" x 1/16" with 1mm dia copper pads on one side with holes sized for component leads. Has 1/8" dia mounting holes on the corners.

You get a 10ml syringe of white silicone heat sink compound for use as a thermal coupling for electronics. High conductivity, low bleed and stable at high temperatures. Perfect for you electronic tinkerers out there with a sinking feeling.

Like a third hand in the electronics lab, this circuit-board rack from Elenco® has a pair of stable 6-1/2" legs and 3" tall arms with clips, one spring-loaded, to hold the board. It's a must for any electronics DIY-er. Adjusts from 0 to 9-3/8" apart and lets you rotate the board it holds a full 360 degrees. Both clips and legs lock with thumbscrews.

The manufacturer, Elenco Electronics, says Bredblox, but what's in a name? This is just a nice little breadboard for electronic experiments. The Elenco Model 9830 measures 6-1/2" long x 2-1/8" wide x 5/16" thick with (2) power busses up both long edges and (63) double rows of more busses. The holes for components and jumper wires are approx .050" each and multiple boards can be interlocked via tabs and ports on the long edges. Now go invent something and get rich.

You pick the 500-Ohm 1/2W, 1K-Ohm 1/2W or the 10K-Ohm panel-mount potentiometer, all from Alpha Products® with dust covers over a 17mm base, panel tabs, 6mm dia x 10mm long shafts, and 3mm solder lugs with washers and nuts. Shafts are knurled and slotted, and single-turn. Turn them with press-fit black plastic knobs, 6mm ID x 16mm dia x 18mm tall with pointers in assorted colors of red, orange, yellow, blue, green and white.

We have discovered a great source for inexpensive IC chips in all your favorite flavors. Please check the list above and make your selection today! Click on each item for a general Spec. sheet or contact us for a full Spec. sheet. INFO@SCIPLUS.COM or 888-724-7587

This little aluminum heat sink measures 1" square x 5/8" with (4) 5/8" tall fins and a threaded 3/32" bore.

These liquid crystal displays are raring to go. As soon as we can get Mary Ann to stop playing with them we'll pick out (5) assorted displays for you. (She keeps zapping them with static electricity to see what pops up. Mary Ann is easily amused.) Sizes range from 1-3/16" x 2" to a few as large as 5" x 10". They're unused. Some have pin leads, some have traces right on the wafer. Either way, they're a terrific bargain.

We searched the world over to find a good source for the most popular transistors. Success! Check out our listing and pick your favorite. Click the item to view the pin outs.

This black aluminum heat sink measures 4" x 2" x 1-1/14" with a 2" x 2-1/4" base. (6) 5/16" thick fins at the top and a set of (5) more at the bottom above the base. In between the fins is a 1-1/4" x 2" space for your chip with a 1-1/8" square thermal pad and a 3/16" bore.